Kirpa Digital Catalog

Volcano Series 100A OPTO Brushless ESC (w/o BEC) Exceed-RC's Volcano Series brushless ESC are micro processor controlled and will work with all types of brushless motors. The Volcano Series brushless ESC can be used in airplanes, sailplanes, helicopters, or 3D helicopters. The controllers come pre-programmed and are ready to use when you receive them. Additional controller adjustments are available and can be accessed and adjusted with your transmitter and program card [ Features Specifications Instruction Manual Buy It Now ] Innovative Discharge Monitoring and Protection Design for real time battery pack monitor Multiple protection features: Low-voltage cut-off protection, over-heat protection, throttle signal loss protection 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters Throttle range can be configured and is fully compatible with all transmitters currently available on the market Smooth, linear and precise throttle response Separate voltage regulator IC for the microprocessor Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles) Our pocket-sized Program Card can be purchased separately to provide easy programming to the ESC at the field. With a program card, you can activate the music playing function on the ESC Model #: Volcano-100-OPTO (07E10) Cont. Current: 100A Burst Current (>10s): 120A BEC Mode: N/A BEC Output: N/A Li-ion/Li-poly: 2-6 Ni-MH/Ni-Cd: 5-18 Prgrammable: Yes Weight: 120g Size: 78*55*15

The QR-DVX is a pouch style 7/14 adapter for Panasonic AG-DVX-100/100A/100B, AG-DVC30 and AG-HVX-200 to accomodate the HyTRON 50 and Dionic 90.The 7/14 Gold Mount is designed to power 6-volt industrial type cameras from standard Anton/Bauer Logic Series batteries instead of hard to get or potentially troublesome consumer types. Employing a highly efficient DC-to-DC converter, the 7/14 adaptor automatically converts the high voltage of batteries such as the HyTRON 50 to 7.2 volts, providing more reliability and longer run times.At the same time, the full 14.4 voltage of the battery is applied to the PowerTap connector, allowing for simultaneous powering of an Ultralight or any nominal 12 volt equipment with the camera.

Exceed-RC's Volcano Series brushless ESC are micro processor controlled and will work with all types of brushless motors. The Volcano Series brushless ESC can be used in airplanes, sailplanes, helicopters, or 3D helicopters. The controllers come pre-programmed and are ready to use when you receive them. Additional controller adjustments are available and can be accessed and adjusted with your transmitter and program card [ Features Specifications Instruction Manual Buy It Now ] Innovative Discharge Monitoring and Protection Design for real time battery pack monitor Multiple protection features: Low-voltage cut-off protection, over-heat protection, throttle signal loss protection 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters Throttle range can be configured and is fully compatible with all transmitters currently available on the market Smooth, linear and precise throttle response Separate voltage regulator IC for the microprocessor Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles) Our pocket-sized Program Card can be purchased separately to provide easy programming to the ESC at the field. With a program card, you can activate the music playing function on the ESC Model #: Volcano-100-OPTO (07E10) Cont. Current: 100A Burst Current (>10s): 120A BEC Mode: N/A BEC Output: N/A Li-ion/Li-poly: 2-6 Ni-MH/Ni-Cd: 5-18 Prgrammable: Yes Weight: 120g Size: 78*55*15

Data Products® R1180 black ink roller designed for use with Canon® P-1DH, 1DHIII, 8DH, 10DH, R11DH, 21DX and P40-DII. Also for use with Casio® 101ER, 110CR, 115ER, 116ER, 120CR, 150CR, 160CR, 800ER, EC-116ER, FR-90, 95, 101, 101C, 105S, 107, 121S, FR-122, 2550, HP-100T, 5, 7 and 8 Series. Casio® HP-15, 16, 100, 100A/S, HR121, 150L/LA, HR-200, PCR-250, 255, 260, 265 and 275. Seiko IR40; Sharp EL1192D, EL1601. Texas Instruments 5027II, 5029A, 5029II, 5030II, 5033II, 5033SV, 5034SV, 5015, 5024, 5027, 5029, 5030, 5034 and 5050. Compatible to Canon® CP-16.

Socrates offers a full range of Business forms to help you do more and save

Use this silicone mold making rubber for making perfect reproductions of original models. It captures intricate detail and is easy to use. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring, and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For The Novice Mold Maker - OOMOO 30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO 30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins, and wax. Net weight 16 oz. (454 grams). Technical Information Mixing Ratio: One to One by volume (100A:130B by weight) Pot Life: 30 min. Demold: 6 hrs. Color: Lavender Properties (Part A and B Mixed) Viscosity: 4,250 cps G/CC: 1.34 Cu. In./Lb.: 20.6 Tensile Strength: 240 PSI Elongation At Break: 250% Die C Tear Strength: 40 pli Compression Set: 37% Shrinkage: .0025 in./in.