Kirpa Digital Catalog

Ergodyne Class 2 Two-Tone Mesh Vest w/Zipper Features: Zipper closure ANSI Certified Polyester Mesh (3.3 oz.) Lime or Orange 2'' Level 2 ANSI Certified Tape with 4.5-inch contrasting color (3M Scotchlite) Tape Specs: (1) 360?, (2) Vertical Pockets: One inside Standards: ANSI 107-Class 2

The K4 amplifier is an advanced and extremely versatile stereo keyboard amp that delivers a wide spectrum of tones. More importantly, it has the ability to sound right with a minimum amount of tweaking. The Traynor K4 consists of three separate, built-in amplifiers, for true stereo operation with a mono-summed woofer. A 200-watt Low Frequency amplifier drives a 12-inch, 200-watt woofer, while a pair of 50 watt amps drive the left and right channels, delivering the mid and high frequencies through a set of 4.5-inch, 30-watt midrange drivers and a pair of 20-watt 2.5-inch compression drivers with horns.One unique feature of the K4 amp is how Channel 1 utilizes a pair of 12AX7 tubes, one for each channel, left and right. These preamp tubes supply warmth and smooth out the harsh harmonic overtones often associated with many modern Digital keyboards. It also excels at maintaining the warmth and character of vintage synthesizers and organs where it isn't always practical to use the much larger powered speaker cabinets they are typically associated with.There is also a select switch to toggle between using either the tube or a Solid-State signal path, bypassing the tube on the input altogether, for those times when the cleanest signal path possible is preferred. Channel one also features a foot switchable Tube Overdrive control, for those who like to add a small amount of grit to their playing. Depending on the level, a small amount of warmth right up to full grit can be had from the Tube Overdrive. Natural tube compression is a very desired tone as the subtle dynamics can't be properly emulated by most of today's digital workstations. Use this feature to add some grit to an otherwise sterile keyboard tone to make it a truly vintage, tube-based one. A single button latching footswitch, like the AFS-1 can be used to engage the Lead/Overdrive feature. If a footswitch is connected, it will disable the front panel switch. Additional tonal control can be had thanks to the three band EQ and 5 position (Bypass, Studio, Live, Piano, Organ) selectable voicing presets.Like Channel One, Channel Two also features its' own Gain control as well as a 3 band EQ. Available inputs include a stereo pair of balanced 1/4-inch TRS inputs and a single XLR, for mono only operation.Channel Three uses an independent Gain control to set the levels for the stereo pair of balanced 1/4-inch TRS inputs and stereo pair of RCA inputs. All three channels feature their own input clip LED's for simple monitoring of input levels from the darkest of stages and a single Master Volume and Power Switch let you be heard when you want to.Channel 4 inputs and Gain control can be found on the rear panel. The possibilities are endless with it. Use it to bring in an external click track or drum monitor mix, or get a microphone feed from the FOH or monitor console. The two inputs can even be used for monitoring two different sources if desired. The signal goes directly into the po

MK Diamond 159404PK20 MK-99TWD is a 20-pack of 4.5-Inch and Turbo Rim Wet/Dry Cutting Blades for Concrete and Brick, 7/8-Inch to 5/8-Inch Arbor. The continuous Rim is designed for Faster Cutting with Minimal Chipping, Cutting Brick, Block, Paver, Concrete, Tile, Roof Tile, Stucco, & Cement Siding.

FishFinder 160C - Rugged, Affordable Color Sounder Perfect for Freshwater Lakes! The Fishfinder 160C is an affordable color sonar option for recreational fishermen who primarily fish freshwater lakes. Fish returns and bottom information are clearly shown on the unit?s bright, sunlight-readable color display, making it easier for you to scope out your fishing grounds. The Fishfinder 160C offers dual-beam transducer operation for improved shallow water performance. Like all Garmin fishfinders, the 160C is rugged, waterproof, and able to stand up to the elements. The Fishfinder 160C also offers Ultrascroll? which allows boaters to get a much faster refresh rate on their sonar display. AutoGain, as well as user adjustable gain, is also standard on all of Garmin?s new fishfinders.Features include: 16-color CSTN display, 3.2" W x 3.2" H, 4.5-inch diagonal, 128 x 128 pixels CCFL backlight for display, LED backlight for keypad Patented transom/trolling mount transducer Dual-beam transducer with user-selectable narrow (14?) or wide (45?) view to see more fish in shallow water Ultrascroll high-rep-rate sonar Automatic display re-scaling on range change (no more vertical lines with range changes) New AutoGain technology to see more fish New sounder design featuring excellent shallow-water performance Power output: 150 watts (RMS) 1200 watts (peak to peak) Depth: 900 foot Unit dimensions: 6.1" W x 4.9" H x 2.9" D See-Thru? technology: shows weak and strong returns simultaneously Power down backup of settings: customer settings are not lost when the unit is turned off Whiteline 2X and 4X Automatic and manual zoom Water speed capable Odometer feature (when connected to speed sensor, purchased separately) Adjustable keel offset Alarms for fish size, shallow water, deep water, and low battery Battery voltage indication NMEA output